3M™ Accuspray™ Atomizing Head, 16615, Blue, 1.2 mm, 4 atomizing heads per kit, 6 kits per case


3M™ Accuspray™ Atomizing Head 1.2 mm is ideal for efficient application of very low-viscosity materials, such as solvent and waterborne basecoat paints and clear coats, with very fine atomization with minimal overspray. Designed for use with 3M™ Accuspray™ ONE Spray Guns, this see-through head is easily cleaned and reused, or removed and replaced for the performance of a new spray gun on demand.

UPC: 51131166158 Categories: , ,


A Replaceable Atomizing Head for Thin Coatings and Very Fine Atomization
Designed to provide very fine atomization and smooth, efficient application of very low-viscosity coatings, our 3M™ Accuspray™ Atomizing Head 1.2 mm is part of the complete Accuspray™ ONE system for the application of waterborne and solvent basecoat paints in thin clear coats in collision repair. This atomizing head is also ideal for the application of stains, varnishes, mold release agents, aerospace and marine top coats, wood coatings and other fluids requiring very fine atomization and an ultra-fine finish. The replaceable atomizing head is molded from a translucent plastic so technicians can easily see when the head is clean. A blue tint color aids in quick identification of the 1.2mm size. This atomizing head can be used on ANY Accuspray™ replaceable atomizing head spray gun.

The 3M™ Accuspray™ Atomizing Head 1.2 mm is easily cleaned and reused, or can be quickly removed and replaced for the performance of a new spray gun on demand.

This 1.2 mm atomizing head for low-viscosity coatings is part of a selection of Accuspray™ Replaceable Atomizing Heads for a full range of coatings and applications. It is an authorized 3M replacement part for any 3M™Accuspray™ Replaceable Atomizing Head Series Spray Gun, including HGP, ONE, HG18 and HG14. 

Part of our Accuspray™ ONE System
These atomizing heads are a big part of our 3M™ Accuspray™ ONE System for automotive collision repair. Designed specifically for use with 3M Accuspray™ spray guns, these replaceable atomizing heads allow for the spray gun to perform like new every time the atomizing head is replaced – the equivalent of a new spray gun on demand, at a fraction of the cost. The benefits include reduced primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. The end result: cleaner, more productive, more profitable collision repair operations.

Accuspray™ and Our 3M™ PPS™ System
Featuring a range of spray guns and replaceable atomizing heads, the Accuspray™ ONE System works in tandem with our 3M™ Paint Preparation System™, or PPS. This system for mixing and spraying solvent-based and waterborne materials eliminates the need for traditional mixing cups and paint strainers. Instead, paint and other materials are mixed and sprayed out of the same PPS liner with a lid and built-in filter. This system lets painters mix less paint, drastically reduce their solvent use, and spend less time cleaning spray guns and cups. All told, it can improve operator efficiency by as much as 15%.

With PPS™, paint can be mixed and sprayed out of the same 3M™ PPS™ cup and liner set. It's a cleaner, faster system that safe from outside contamination. Another key advantage of this closed system is that it enables the user’s spray gun to function at any angle, even upside down. That means less time spent repositioning. The liner, lid and built-in filter are all disposable, further reducing cleanup time.

Additional information

Weight 1.851 lbs